Jaw Crusher PE1000x1200 shippment
Capacity: 400 tons/hour
Motor power: 110kw
Max. Feeding Size :850 mm
Maintenance method of jaw crusher:
1. Regularly check the jaw crusher. When any stone crushing equipment is switched on and off, you should pay attention to regularly shut down the jaw crusher to check the internal wear of the machine, such as the center feed pipe, cone cap, impeller upper and lower runner liners, circumferential guard plates, and wear resistance The wear degree of the block, replace the more severely worn parts in time, and repair these parts. At the same time, pay attention to the weight, model and size of the replacement parts, and be sure to replace them according to the original part parameters.
2. Lubrication of mechanical parts. The jaw crusher adopts Mobil car grease or 3 lithium base grease, adding an appropriate amount of grease every 400 hours of work; after 2000 hours of work, open the main shaft assembly to clean the bearings; generally work 7200 hours to replace the new bearings.